the materials science of composites课件 Composites Review.pdfVIP

1) Discuss the difference between the Puck-Schneider faillure criterium and the Tsai-Wu faillure criterium 2) Theres a railroad company that produces train wagons and they want to use a sandwich beam. The gap that the sandwich beam overspans is 60 cm. Thickness of the beam= 23 mm, thickness skin = 4 mm. The producer of the sandwichbeams says that his beams have beam stiffness of 7 GPa. The constructor of the train wagons decides to make a prototype and to verify the the producers properties. After having cut out a sample of 25 cm, they do a 3 point bending test with a spanlength of 20 cm. The result of the bending is a bending stiffness of 2 GPa. Search an explanation for this difference Part material science of composites: only 1 question. You want to perform a tension test on a carbon/epoxy composite (0,90°) textile. Fibre length 3 mm, fibre diameter 7 micron (elastic properties are given from epoxy and carbon). Because of the weaved structure the E-modulus isnt constant and has to be multiplied by factor cos(theta)^4. Assume isostrain, calculate, ply thickness, number of plies, the angle theta, strength and stiffness of the composite and draw a stress strain curve of it. 1.2.一些概念 1.pregregs 预浸 2.catocave 3.puck faliure criterion, how to measure it. 4.causes for delamination 5.transverse crack, the reason, 6. modification 7.G1/Gic+G2/G2c 应用。 1.woven 的 E=1/2(E0+E90) 2.stress concentration 的应用：算应力(这个题仔细问一下) 3.算 ply 的厚度，及层数 4.画应力应变曲线，要求有具体数值。 Part properties of laminated properties: Choose 2 of 3 questions Questions Ive got were 1) Discuss the difference between the Puck-Schneider faillure criterium and the Tsai-Wu faillure criterium a. for Puck-Schneider faillure criterium: Differentiating failure criteria (fibre dominated failure