江阴大桥（Jiangyin Bridge）.docVIP

江阴大桥（Jiangyin Bridge） Jiangyin, Yangtze River bridge, between Chinas Jiangsu city of Jiangyin and Jingjiang, is a planned north-south north-south trunk line that spans the Yangtze river. Jiangyin Yangtze River Highway Bridge is a super steel box girder suspension bridge in Chinas first super span km, also in twentieth Century, the first Chinese world fourth large steel box girder suspension bridge across the river, is the throat project of the national highway in the main framework of Tongjiang to Sanya main line highway and the Beijing Shanghai national trunk highway, Jiangsu province is over the Second Yangtze River bridge. Introduction of bridge Jiangyin, Yangtze River bridge, is located between Jiangyin and Jingjiang, Jiangsu, China. It is a planned north-south trunk line along the coast of Jiangyin, Yangtze River Bridge The position of the Yangtze river. The bridge type scheme is a long-span suspension bridge with medium span 1386m. It is the first bridge in China with a span of over 1000m, and the total length of the whole bridge is nearly 3km. The bridge deck is arranged as a standard two-way 6 lane highway, with a central separation zone and an emergency parking zone, and each side of the main bridge across the river is equipped with a 1.5m wide sidewalk. The main span bridge beam adopts flat box girder with wind nozzle, the box height is 3M, and the total width is 37.7m. The span to span ratio of a pair of cables is 1/10.5, consisting of 5 mm galvanized high strength steel wire, and parallel steel wire bundle method (PWS method) is adopted to erect the cable. The bridge height navigation 50m. The tower is about 190m high and is a portal type reinforced concrete structure. Located on the South Bank of south side on the rock foundation. Shallow water tower is located on the north shore of the outside of the pile foundation construction of the island. The South Anchor platform is a gravity rock socketed anchor structure. The North hole is composed of multi spa