相机说明（Camera description）.docVIP

相机说明（Camera description） In order to protect the photosensitive device in the camera, not exposure, shutter is always closed; when shooting, adjust the shutter speed, as long as the shutter release button on the camera (i.e. camera button), the shutter opening and closing the gap, let through the photographic lens light, the photosensitive film in the camera to get the correct exposure light through the shutter in the photosensitive device, write memory card. As for the B SLR camera shutter function common, although by your freedom to decide the length of exposure time, shooting more flexible, but at present most of the consumer digital camera can not support, such as to provide up to 2 seconds, 8 seconds, 16 seconds slower the default value. The perfect shutter must usually have the following aspects: first, must have to accurately control the exposure time, this is the most basic function of the camera shutter; two, must have a sufficiently high shutter speed to move at high speed full or effective control of the depth of field; three, must have long the effect of exposure time, which should be equipped with T or B door door; four, with flash sync shooting function; five, with self timer function, long time exposure in no case for the shutter line or the self timer, the shutter is open. Flash lamp The English name is Flash Light. Flash is also one of the ways to increase exposure, especially in dim places, where flashing lights help to make the scene brighter. The use of flash will also appear in the film character defects, for example, the flash of light may be residual phenomenon occurred in the eyes of the pupil, and then the red eye, so many cameras are the remove red eye design to add this function, in the open before you hit the weak light flash for the pupil to adapt, then real red eye flash, avoid occurrence. Medium and low digital cameras generally have three flash modes, that is, automatic flash, eliminate red eye and turn off the flash. A more advanced