系统出错提示大全!（System error prompt!）.docVIP

系统出错提示大全!（System error prompt!） System error prompt! [English Tips] Abort, Retry, Ignore, fail? [Chinese] quit, Retry, ignore, cancel [reason] unable to recognize a given order, or a disk or device error that failed to execute the command. It could be a disk corruption or a floppy drive door. [policy] press A to completely terminate and return to the DOS prompt. Press the R key to repeat the command. Press I to continue processing, ignoring errors, very risky, and suggest not to use Press the F key and do not execute the command that has a problem. Proceed with the following. It can be used sometimes. [English tip] Access Denied Access denied [reason] attempts to open a file marked as read-only, stored on a write protected disk, or locked on the network. This information is generated if the Type command is used on the subdirectory, or the CD (chdir) command is used on the file. [countermeasures] should use the Attrib command to delete the read-only state of the file, or remove write protection from the disk, and then try again. [English tip] Bad, Command, or, file, name Incorrect command or file name [reason] unable to recognize incoming commands [countermeasures] should be checked to ensure that the input command is correct. Verify that the command file is found in the specified directory or on the search path specified by the Path command. [English tip] Boot error [boot error in Chinese] [cause] the peripheral should not be detected at boot time. [countermeasures] should check the computer settings parameters, such as the user can not solve this problem, please find special maintenance personnel. [English tip] Cannot, find, system, files System files cannot be found [cause] an attempt was made to load an operating system from a drive that contains no system files. [countermeasures] should use the sys command to copy the system files to the root directory. Unless you really cant restore the system file, you can reformat the disk with the Format/s command. [English