安全技师考试1（Safety technician test 1）.docVIP

安全技师考试1（Safety technician test 1） Safety technician training 1. Accident handling procedures Report the accident (location, nature, reason of analysis), emergency command center, initiating emergency response plan, organizing and directing Left left All departments assisted in filing the accident summary to organize the assistance of all departments Left write down Investigation of accident investigation report, investigation report of accident investigation, examination and approval, accident treatment and approval. 2. Production characteristics of methanol process The methanol synthesis adopts 6.0 Mpa low pressure synthesis technology and the subproducing pressure steam for the conversion system of methane. The fractionation is made by using the three-tower distillation and wastewater recovery tower to make methanol that conforms to the national standard. This process of finished product tank farm with the CPC holding tank, 115 m3, 110 m3 storage tank, 110 m3 tar naphtha storage tank, 11663 m3 of methanol storage tank two and 331 m3 fusel storage tank, methanol intermediate intermediate storage tank and tank farm with fine methanol crude methanol storage tank are four storage tank of 500 m3. In order to save chemical and dangerous fire, this process sets up a foam station with fixed foam fire extinguishing system to protect the tank area and the middle tank area of methanol. This process also has installed station, can according to production requirement to carry on the company qualified product sale. So the methanol process is a diversified process of product production, product storage, and product sales. The finished tank and the intermediate can be a significant hazard site. 3. Parameters of finished tank and intermediate tank area Finished product tank: 110m3, 110m3 oil tank, 115m3 oil storage tank, 11663m3 of methanol storage tank, 331 m3 of mixed alcohol storage tank, The middle tank of methanol is the four storage tanks of 500 m3 in the middle tank and the