全电压关合试验的控制策略及其实现 - 电网技术.pdf

29 卷 17 期 电 网 技 术 Vol. 29 No. 17 2005 年9 月 Power System Technology Sep. 2005 文章编号：1000-3673 （2005 ）17-0008-06 中图分类号：TM83 文献标识码：A 学科代码：4704034 全电压关合试验的控制策略及其实现 范兴明，邹积岩，董恩源，丛吉远 （大连理工大学电气工程及应用电子技术系，辽宁省 大连市 116024 ） CONTROL STRATEGY OF SYNTHETIC MAKING TEST FOR HIGH VOLTAGE CIRCUIT BREAKERS AT FULL VOLTAGE AND ITS REALIZATION FAN Xing-ming，ZOU Ji-yan，DONG En-yuan，CONG Ji-yuan （Department of Electrical and Electronics Engineering，Dalian University of Technology， Dalian 116024，Liaoning Province，China ） ABSTRACT: Compared with high power laboratories abroad, 就对其基本规则和具体实施条件进行了讨论和研 high voltage test level in China is to be improved. According to [1,2] 究 ，并认为对于预燃弧时间不超过3.2ms （频率 the existing equipment situations and testing conditions of 为 50Hz 的系统）的高压断路器可以不进行关合试 main domestic test houses, a new testing circuit for synthetic 验。最新实施的IEC60427 和国家标准GB 1984-2003 making tests, in which the triggered vacuum switch is used as 都规定，对于预击穿显著的断路器除可以在降低的 fast making device based on current generator, is proposed. The 外施电压下进行额定的短路关合试验以外，还必须 control strategy and its realization are emphatically expounded, 在规定的外施电压下进行具有最大预燃弧的关合、 and the main factors impacting the control accuracy, such as the switch-on phase of tested device, dispersivity of switch-on 合分以及分 合分试验，以证明当预击穿发生在外 time and pre-breakdown characteristic, are analyzed. The 施电压峰值、出现对称关合