如何提高外保温墙体贴饰面砖的安全性（How to improve the security of decorative tile for external thermal insulation wall）.docVIP

如何提高外保温墙体贴饰面砖的安全性（How to improve the security of decorative tile for external thermal insulation wall） How to improve the security of decorative tile for external thermal insulation wall Influenced by the climatic conditions, consumption levels and aesthetic habits in many parts of our country, the decoration of exterior walls with ornamental tiles is favored by many real estate developers and residents. However, with tile hollowing, shedding accident happens, can not help but make people feel worried. In the past ten years, the central building energy conservation policy has been conscientiously carried out throughout the country, and the exterior insulation composite wall has become the preferred form of wall insulation. Can the decorative bricks be adhered to the light, low and strong insulation materials to ensure the safe use? This has become the focus of attention of the industry. The facing brick adhered directly on the outer wall makes the wall bear two kinds of external load: First, the face brick and adhesive weight, or about 0.25 kN/m2; Two is the wind load (mainly refers to the negative pressure), in the Beijing area, 20 meters high from the ground to calculate maximum negative pressure value of about 2.1 kN/m2, 100 m from the ground at about 3.6 kN/m2 (in the coastal areas, this value may be up to 8-9 kN/m2). Depend on the adhesive strength between the adhesive and the outer wall. According to the state industry standard external wall facing brick construction and acceptance procedures requirements, the external wall facing brick project has been tested the strength of decorative brick bonding strength, drawing strength of not less than 0.4 MPa, or 400 kN/m2. It is obvious that the initial adhesive force provided by the accepted works has a large enough safety factor to overcome the external load. Therefore, most of the exterior wall facing brick works can be safely used for a long time. The reason in the individual occurrence of tile time shedding prob