电子线路总结（Electronic circuit summary）.docVIP

电子线路总结（Electronic circuit summary） 1. Pure monocrystalline semiconductor is also known as the semiconductor, and its internal carrier free electron hole number is equal. 2, emitter follower is the common collector amplifier circuit, due to its voltage amplification digits is approximately equal to 1, and the output voltage phase with the input voltage, so it is also called a voltage follower (emitter follower). 3. The common mode voltage amplification factor of the ideal differential amplifier is 0, and its common mode rejection ratio is infinity. 4. Normally, in analog appliances, transistors work in amplification state. In digital appliances, transistors work in saturation and cut-off conditions. 5. The limiting circuit is a waveform shaping circuit, which is divided into upper limit, lower limit and two-way circuit. 6. The function of main JK trigger is maintained, counting, setting 0, setting 1. The interstage coupling of the multistage amplifier has the coupling of resistance capacitance, direct coupling and transformer coupling. 8. The series stabilizer circuit with the amplifying link is divided by the adjustment circuit, the reference circuit, the sampling circuit and the comparison amplifying circuit. The characteristic of the time sequence logic circuit is that the output state depends not only on the input state at the time, but also on the original state of the output terminal. 10. When the PN junction plus the reverse voltage, the space charge area will widen. The reverse current is formed by a small number of carriers. 11. Semiconductor has unique characteristics of electrical conductivity, such as thermal sensitivity, photosensitivity, force sensitivity and doping. 12. The one-way conductivity of the diode can be used to turn alternating current into a pulsating direct current. 13. The silicon stabilizer normally works in reverse breakdown zone. In this area, the voltage of the silicon stabilizer is basically unchanged when the current flowing through