建筑制图规范大全（Architectural drawing code）.doc

建筑制图规范大全（Architectural drawing code） Specification for drawing construction Daquan This paper contributed by liran1024. Specification for drawing construction Daquan The first part Specification for construction drawing The first part Drawing specifications 1) standard architectural drawings) standard architectural drawing GB/T 50104-2001 2) unified standard for building drawings) unified standard for building drawings GB/T 50001-2001 3) general drawing standard GB/T50103-2001 standard for general layout drawings) The first part Drawing specifications Mapping specification aims to unify the building drawings rules is designed to unify building drawings rules, drawing specifications to unified building drawings drawing rules, ensure quality, improve the mapping efficiency, achieve clear pattern and ensure the drawing quality, improve drawing efficiency, make drawing clear and concise, with the design, construction and filing requirements, concise, conform to the design, construction and filing requirements, meet the needs of Engineering construction. The needs of the construction. Mapping specification is the basic provisions of building drawings, drawing specifications is the basic provisions for building drawings, is building drawing the basic provisions in the general layout, architecture, structure, water supply and drainage, HVAC, general layout, architecture, structure, water supply and drainage, HVAC, electrical and other professional graphics. Gas professional drawing. The first part Drawing specifications 1.1 drawings specifications A0 A1 A2 A3 A4 841 x 841 x 1189594 x 841594 x 420 x 420 x 594297 x 297 x 420210 x 210 x 297 (unit: mm) unit: mm) The first part Drawing specifications 1.2 line Line width B 0.5B 0.25b linewidth is narrower than that of crude in the group of 1 0.7 0.5 0.35 fine lines 0.25 0.18 2 1 0.5 1.4 0.7 0.35 0.5 0.25 0.35 0.18 The first part Drawing specifications 1.2 line The first part Drawing specifications 1.2 line Solid - solid - solid