Michigan Technological University’s Formula （密西根科技大学的公式）.pdfVIP

Michigan Technological University’s Formula SAE Team would like to thank our sponsors for their generous support. Alumni and Sponsors of the F-151 and F-194, As a team, we have reached our major milestones for the Fall semester. The team began the year with the task of installing the fuel-injected KTM 525 in the F-151 chassis. With that project complete, we had two drive days with our 2014 competition car! In October! Over the summer, Yamaha donated two Phazer Genesis engines for our 2015 competition car, F-194, which is currently under construction. One of the Genesis engines is running on the dyno. We designed a new intake for the KTM 525. McLaren racing created the intake on a 3D printer and helped the team develop an engine tune over Thanksgiving break. The F-151 was two years in the making and the team is excited to bring a solid entry to Michigan International Speedway for the FSAE Michigan competition in May 2014. Also, before the end of Spring Semester, the team will have a drivable F-194 featuring the Yamaha Genesis engine (CVT drive) and new 10” wheel assemblies. We will also have design for the 2016 competition car based on the F-151 with the Yamaha Genesis engine. We have a lot of challenges coming up with developing a new engine package and a CVT but we’re up for it! All team members have been working non-stop to make sure that the projects will be completed by their deadlines and in time to attend our upcoming competition. With the amount of work put in by all over the last few weeks it is safe to say that all of our goals will be met; which will pay off at competitions with us scoring higher. We would like to thank you all again for your continued support and look forward to sharing