应用混合权函数边界元法的特高压换流阀屏蔽罩表面电场计算_刘士利.pdf

DOI:10.13334/j.0258-8013.pcsee.2013.25.020 33 25 Vol.33 No.25 Sep.5, 2013 180 2013 9 5 Proceedings of the CSEE ©2013 Chin.Soc.for Elec.Eng. 0258-8013 (2013) 25-0180-07 TM 85 A 470·40 ( 102200) UHVDC Converter Valve Shielding Case Surface Electric Field Calculation Using Hybrid-weight-function Boundary Element Method LIU Shili, WEI Xiaoguang, CAO Junzheng, TANG Guangfu, ZHA Kunpeng, WANG Gaoyong (Smart Grid Research Institute of State-Grid, Changping District, Beijing 102200, China) ABSTRACT: The calculation results of three-dimensional electric field of the valve towers in a DC converter station plays an important directive role in the design of the shielding case for the valve towers and the control of its surface field intensity. However, due to its enormous volume and complex structure, there are difficulties in the digital simulation of the A5000 800kV shielding case for valve towers. To save computing resource, A new method, called hybrid-weight-function boundary element 16kV/cm method (HWFBEM) was proposed. In this method, the 20kV/cm Collocation and Galerkin procedures were synthetically employed to deal with the continuous integral equations. It makes full use of the advantages of the two procedures and