松下LumixDMC-TZ10图像传感器维修-iFixit.PDF

Panasonic Lumix DMC-TZ10 Image Sensor Repair Panasonic Lumix DMC-TZ10 Image Sensor Repair On my TZ10 I suddenly could not make any pictures any more without ghost particles visible. And even worse, those somehow a ected the cameras ability to ocus. Written By : BjoernErik © iFixit — CC BY-NC-SA www.iFixit .com Page 1 o 8 Panasonic Lumix DMC-TZ10 Image Sensor Repair INTRODUCTION I decided to open her up and see it can be repaired - and it could! Apparently this guide also works or a similar camera, the Lumix Panasonic DMC-ZS10, with the exception that in Step 3 there are 4 extra screws to remove, two on each end. TOOLS: 8 Needle Nose Plier (1) Phillips #0 Screwdriver (1) Flathead 3/32 or 2.5 mm Screwdriver (1) So t Cloth (1) or Q-Tips or Lint-free cloth © iFixit — CC BY-NC-SA www.iFixit .com Page 2 o 8 Panasonic Lumix DMC-TZ10 Image Sensor Repair S ep 1 — This shows he problem  One can clearly see the dust reproduced on the image S ep 2 — Tools I used  Magni ying Glas  Electronics Screwdriver set  Cloth and Q-Tips  tweezers  My Swiss-Army Kni e :-)  TIP! have a sheet