作业指导书的英文.docVIP

作业指导书的英文 篇一：PFMEA作业指导书(中英文) 德信诚培训网 PFMEA作业指导书 1 PURPOSE（目的） The purpose of this work instruction is to provide a method for continuous improvement through the use of PFMEAs. 此作业指导书的目的是为运用制程失效模式及效果分析达到持续改善目的提供方法。 2 SCOUPE（范围） This work instruction applies to any manufacturing process that has a customer requirement for failure mode effect analysis or any process at FLEX (Doumen) where management requires a PFMEA. 适用于客户要求或管理要求而需要做失效模式及效果分析的所有制程。 3 DEFINITIONS（定义） 3.1 PFMEA: Process Failure Mode and Effect Analysis. It should describe all the potential failure modes which may occur in process and their corresponding failure effects; evaluate and rank the severity, occurrence and detection of the failures. It should also describe the current control method, recommend corrective action, person responsible responsibility and due date. PFMEA--制程失效模式及效果分析。它应列出制程中所有可能出现的潜在失效模式以及相应的失效结果，评价和评定其严重度、发生度、检测度的等级分数。同时指出当前的控制方法和建议的改善行动以及相应的责任者和完成期限。 3.2QE: Quality Engineer QE:品质工程师 3.3SQE: Supplier Quality Engineer SQE: 供应商管理品质工程师 3.4PE: Process Engineer PE: 工艺工程师 3.5ME: Manufacturing Engineer ME:制造工程师 3.6TE: Test Engineer TE: 测试工程师 3.7EE: Equipment Engineer EE: 设备工程师 3.8DCC: Document Control center DCC:文件控制中心 3.9RPN: Risk Priority Number RPN: 风险优先系数 4. REFERENCE（参考文件） 4.1 DMP-010 Corrective and Preventive Action 纠正与预防措施 5. RESPONSIBILITY（职责） 更多免费资料下载请进：好好学习社区 篇二：TS16949来料检验作业指导书(中英文) TS16949来料检验作业指导书 Incoming_Inspection_Work_Instruction 文件更改历史记录 Amendment History TS16949来料检验作业指导书 Incoming_Inspection_Work_Instruction 1.0 Purpose目的 The objective of this procedure is to define a standard inspection method in performing inspection and testing of components or materials. 本程序目的在于定义对元件或材料进行检验/测试的标准操作方法。 Scope适用范围 This procedure is applicable to all components and materials that require the relevant inspection and testing, as specified in the individual Part or Material Specification. 本程序适用于所有按照元件和材料规格进行检验和测试的元件和材料。 2.0 Sampling / Equipment