第4单元-NX-OS系统基本命令介绍.pptx

  1. 1、本文档共11页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
第4单元-NX-OS系统基本命令介绍

NX-OS系统基本命令介绍(1) 清空配置重启 清空配置: switch # write erase Warning: This command will erase the startup-configuration. Do you wish to proceed anyway? (y/n) [n] y 重启物理设备: switch # reload !!!WARNING! there is unsaved configuration in VDC!!! This command will reboot the system. (y/n)? [n] y 如果是在某个VDC里面重启这一台VDC: N7K-B-1# reload vdc This command will reload the current VDC. (y/n)? [no] y 进入系统 ---- System Admin Account Setup ---- 是否激活增强安全的密码: Do you want to enforce secure password standard (yes/no) [y]:no 设置admin的密码: Enter the password for "admin": cisco Confirm the password for "admin": cisco 是否激活admin vdc: Do you want to enable admin vdc (yes/no) [n]: n Would you like to enter the basic configuration dialog (yes/no): no User Access Verification switch login:admin Password: cisco switch# 配置主机名与Banner 配置主机名: switch(config)# hostname N7K 配置Banner: N7K(config)# banner motd ^ Enter TEXT message. End with the character '^'. > Welcome to DC CCIE LAB^ 查看配置与存盘 查看running-config: N7K# show running-config 查看startup-config: N7K# show startup-config 存盘: (注意:不支持使用“wr”存盘) N7K# copy running-config startup-config 查看文件系统 查看本地flash(2G): N7K# dir N7K# dir bootflash://sup-local/ 查看本地log存储: N7K# dir log: 查看外部log存储(8G): N7K# dir logflash: 查看模块状态 查看模块状态: 配置管理IP地址 配置管理IP地址: N7K(config)# interface mgmt 0 N7K(config-if)# ip address 137.60.3.71/24 N7K(config-if)# no shutdown Ping测试: N7K# ping 137.60.3.155 vrf management PING 137.60.3.155 (137.60.3.155): 56 data bytes 64 bytes from 137.60.3.155: icmp_seq=0 ttl=254 time=49.108 ms 64 bytes from 137.60.3.155: icmp_seq=1 ttl=254 time=15.706 ms 64 bytes from 137.60.3.155: icmp_seq=2 ttl=254 time=15.539 ms 64 bytes from 137.60.3.155: icmp_seq=3 ttl=254 time=15.656 ms 64 bytes from 137.60.3.155: icmp_seq=4 ttl=254 time=15.427 ms N7K开启Telnet功能: N7K(config)# feature telnet N7K上在vrf management里面配置缺省路由: N7K(config)#vrf context management N7K(config-vrf)# ip route 0.0.0.0/0 下一跳IP 配置CDP 配置CDP: N7K(config)# cdp enable N7K(config)# inter

文档评论(0)

dajuhyy + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档