利用常用的excel电子表格软件绘变形监测曲线图（Using the commonly used excel spreadsheet software to draw the deformation monitoring curves）.docVIP

利用常用的excel电子表格软件绘变形监测曲线图（Using the commonly used excel spreadsheet software to draw the deformation monitoring curves） Abstract: this paper introduces the methods of using the software of CASS software and Excel spreadsheet to chart the settlement of the settlement, and describes the thesis of masters thesis and the example of a project. Keywords: settlement monitoring; Graph drawing; CASS software; Excel spreadsheet The introduction With the continuous progress of modern society, there are more and more high-rise buildings and supertall buildings. In order to ensure the normal life and safety of the construction, deformation monitoring of construction is particularly important. In order to grasp the deformation law of the monitoring objects and its changing trends, the monitoring objects must be distorted and monitored according to the corresponding specifications and requirements, and then a large amount of monitoring data is processed. The deformation monitoring curve can be simple, intuitive and accurate to reflect the monitoring results so as to serve the decision makers well. To draw is simple, accurate and simple graph, in addition to the programming or buy some better deformation monitoring software, the author in this article provides two kinds of commonly used software is used to plot of monitoring methods: one is clever by using CASS software in the tools cross section method, the second is flexible with the method of commonly used software EXCEL draw chart, and combined with jiangmen mitsubishi heavy industries Jin Ling air conditioner co., LTD., retaining wall slope deformation monitoring project examples to explain its. 1. Use the method of drawing cross-section in CASS software to monitor the curve diagram CASS topography software is a digital surveying and mapping data acquisition system based on AUTOCAD platform technology, which is widely used in the fields of map, terrain and engineering surveying. However, there is no reference to the drawing of