兰大《工程力学(ii)(材料)》13春在线作业1（Lanzhou Engineering Mechanics (II) (material) 13 spring online homework 1）.docVIP

兰大《工程力学(ii)(材料)》13春在线作业1（Lanzhou Engineering Mechanics (II) (material) 13 spring online homework 1） 14 spring 13 autumn big orchid Engineering Mechanics (II) (material) 14 spring 13 autumn big orchid Engineering Mechanics (II) (material) 13 spring online homework 123 Total score: 100 test time: - Radio examination A multiple-choice question Judgment question Radio examination questions (10 questions, 40 points) 1. of the existing two versions: (1) plastic material if the maximum tensile stress of a point max= o s, the point will yield; (2) in brittle materials if the maximum tensile stress of a point max= o b, the point will have a fracture, according to the first, the fourth strength theory, (saying). A. (1) is incorrect, (2) correct B. (1) correct, (2) incorrect C. (1) and (2) are correct D. (1) and (2) are incorrect Full marks: 4 2. there are four main answers to the main features of oblique bending. Try to determine which is correct. A. My = 0, Mz = 0, FNx = 0 B., the neutral axis is not consistent with the centroid axis of the section, and does not pass through the centroid of the section C. My = 0, Mz = 0, FNx = 0, the neutral axis and the spindle centroid is not consistent, but through the centroid D. My = 0, Mz = 0, FNx = 0, the neutral axis and the centroid is parallel to the main axis, but not through the centroid E. My = 0, Mz = 0, FNx = 0, the neutral axis and the centroid is parallel to the main axis, but not through the centroid Full marks: 4 3. the internal force in the mechanics of materials means Force inside an A. object The interaction force between particles in a B. object C. the amount of deformation caused by external forces D. the amount of change in the resultant force of interaction between particles on either side of a cross section caused by external forces Full marks: 4 4. a couple of concentrated bending moment (). A. is greater than zero B. is less than zero C. equals zero D. is uncertain Full marks: 4 5. shear failure occurs on (). A.