吉大《工程力学(工)》在线作业一（Engineering Mechanics (Engineering) Kyrgyzstan online homework）.docVIP

吉大《工程力学(工)》在线作业一（Engineering Mechanics (Engineering) Kyrgyzstan online homework） Engineering Mechanics (Engineering) Kyrgyzstan online homework one by one, multiple choice: 1. low carbon steel after cold hardening, the mechanical properties of the following changes (). A. yield stress increased, the elastic modulus decreased B. yield stress increased, toughness reduced C. yield stress unchanged, elastic modulus and yield stress invariant D. constant, constant toughness answer: B2. () is one of the basic characteristics of truss structure. (full: 4) A. only axial force, B. only bending moment, C. rod between the rigid connection point, D. between the rod is not hinged, the correct answer: A3. axial tension (pressure) on the cross section of the normal stress () distribution. (full: 4) A. homogeneous B. linear C., assuming even D. parabola correct answer: A4. general method of calculating internal force is (). (score: 4) B. node method C. D. section method, synthetic geometry, physical and static three correct answers A. static analysis: the necessary and sufficient conditions for C5. equilibrium of coplanar force system is the force system (zero). (score: 4) A. B. C. resultant force couple principal vector D. principal vector and principal moment of correct answer: mobile A6. objects only perpendicular to the direction of the supporting surface, the support object does not limit the other direction (called) support. (full marks: 4) A. fixed hinges, B. movable hinges, C. fixed ends, D. smooth surfaces, correct answers: B7., in the following conclusions, only () is correct. (out of 4) for the A. internal stress algebra and B. stress is the internal force distribution of internal force is the force set, C. stress is the internal force of internal force is greater than the stress force D. answer: B8. uniformity assumption that the material is the same (internal). (full: 4) A. stress, B. strain, C. displacement, D., mechanical property is correct. Answer: D9., which restr