杂牌机总线调整（Hodge bus adjustment）.docVIP

杂牌机总线调整（Hodge bus adjustment） A bus into the machine ) RS09-M301 remote factory state enter: press the menu button menu and then enter the password 6483 into the bus, then use the same method to enter the following bus adjustment, in the same way to exit 02) LC863320A+LA76810 movement into the bus: volume is reduced to a minimum, at the same time hold volume - key and remote playback button. 03) LC863328A+LA76810 movement into the bus: hold the TV volume reduction, then press the 0 button on the remote control for the 3 time, you can enter the state of repair. 04) LC863328-50J2 movement into the bus method: use 50J2 remote control, uncover the remote control under the sticker, you can see a row of four hidden keys, the left number of second keys, both the bus access and exit key. This model also works with the 53P4 remote control, but there is no bus key. 05) peony color TV DXN1: press the volume reduction button on the panel to reduce the volume to 0, do not let go, and then press the remote control screen to enter the maintenance status. 1) 29 inch TV Hodge motherboard CPU:M37220M3-010SP decoding: M52340sp. remote controller 8018001 press the menu button, and then press 6.4.8.3 2) 2) 863528B 52K7 Hodge, press the menu button 5 times in the program exchange input 24833) 3) Zapai 19 inch machine, LA76818A, LC863524B-53P4, 24C08, press the recall key press panel on the volume key does not let go, then a remote recall key, repeat the above process into a state of white balance adjustment, again into the state adjust menu. 4) LC863320 5R19 enters the adjustment method. Enter the I2C method: press the screen button to appear once a screen, and then press three mute key to enter. 5) Hodge assembly machine, SANYO movement. Micro block model is LC863532-5z00 to open the remote control to find inside empty button click 17 inch Hodge machine CPU is minus LC863328A5Y29 to zero does not let go by the main TV panel volume. Then according to the remote control on the [0] three o