绝缘导线载流量估算（Insulated conductors flow estimation）.docVIP

绝缘导线载流量估算（Insulated conductors flow estimation） Aluminum core insulation wire carrying capacity and section multiple relationship Section 11.5: 2.5461016253550 70951203.533 2.5 2.5. Current: 9142332486090100 123150210238300 The estimation formula: Two point five multiplied by nine, to go up by a smooth number. Thirty-five by three point five, both in groups by five points. The conditions have changed with the conversion, the high temperature of ten percent off copper upgrade. Intubation root number two three four, 87 forty percent off full flow. Explain： (1) this section formulas for various insulated wire (rubber and plastic insulated wire) ampacity (safe current) is not directly pointed out, but section multiplied by a certain multiple to that obtained by mental arithmetic. Can be seen from table 53: with the increase of multiple section decreases. Two point five times nine, to go up by a smooth number is 2.5mm and following the various cross-section aluminum insulated line, its carrying capacity is about 9 times the number of cross section. Such as 2.5mm wire carrying capacity for 2.5 x 9 = 22.5 (A). From the load flow and section number 4mm and above lead multiple relationship is along the line to reach multiple successive reduction L, 4 x 8, 6 x 7, 10 x 6, 16 x 5, 25 x 4. Thirty-five times three point five, both in groups by five, 3.5 times the conductor said is 35mm carrying capacity for the section number, that is 35 x 3.5 = 122.5 (A). From the 50mm and above the wire between the carrying capacity and section number multiple relationship into two two line into a group, followed by a multiple of minus 0.5. 50, 70mm wire carrying capacity for the section number 3 times; 95, 120mm wire carrying capacity is 2.5 times the cross-sectional area of the number, and so on. Conditions plus the change in conversion, the high temperature of ten percent off copper upgrade. The above formula is aluminum core insulation wire, deposited in the environmental temperat