LGP原理与对比.docVIP

一、走进导光板 导光板设计原理源于笔记本电脑的液晶显示屏，是将侧边的线光源转换成面光源并均匀发光，因其具有超薄、超亮、导光均匀、节能、环保、无暗区、耐用、不易黄化等众多优点，被广泛应用于液晶显示器的背光源、超薄的广告灯箱、医疗用的X光看片器、平板型的灯饰照明、亮光工程的光效运用、发光标示牌等类的场合，广阔的市场前景为导光板加工业带来了一片生机。 然而，随着行业竞争的加剧以及导光板逐步走向高端化，传统的制作工艺已无法满足市场的需求，对于导光板加工业而言，工艺革新势在必行。 1. Enter the world of LGP The design principle of light guide plate is from laptop computers LCD screen. It converts linear light source on the side into area light source and emits uniform light. Because LGP is super-thin, super-bright, durable, environmental friendly and energy saving and has the advantages of optical uniformity, no dark areas, difficult to yellow and so on, it is widely used in LCD backlight, super-thin advertising light boxes, medical X-ray film box, flat type lighting devices, light usage of light project, light-emitting signs and other places. The broad market prospects have brought vitality to the LGP processing industry. However, as industrial competition intensifies and LGP industry gradually becomes high-grade, the traditional production process has been unable to meet the market demand. Therefore, for LGP plate processing industry, technological innovation is imperative. 二、导光板制作工艺 第一代制作工艺：油印网点导光板。其主要特点是生产速度比较高，但由于要出菲林做模板，所以产品设计修改不方便，制作周期较长。这种传统的工艺工序也非常多，操作复杂，生产耗材较多，人工投入较大，厂房占地面积很大（一般200-300平方米/每条线）。此外，由于起始点油墨不均匀，烘烤不均匀的问题，使产品的合格率较低。 而且加工方式是化学过程，在生产过程中腐蚀性酸产生，原材料有毒，是一种不环保的生产方式。 2. Production process of LGP The first generation of production process: LGPs made by HYPERLINK /w/screen/ screen HYPERLINK /w/printing/ printing technique. Its main feature is that the production rate is relatively high, but this technique needs film as a template, and is inconvenient in designing and modifying the products and thus has longer production cycle. This conventional production has multiple processes and complex operation. There needs a lot of consumable materials and labor cost during production. Because the uneven printing ink at starting point and uneven baking, the ratio of qualified products is very low. It is no