射频电路理论与技术-lectrue 5.pptVIP

射频电路理论与技术;微带线的不均匀性;;;;;;;;;;;;;;;;;;;;;;;7.1. Introduction;7.2. The Basic Circuit Model of an Open-Circuit ;B. The interpretation of an open circuit from the field based moment method ;(Continued -) Construction Cut the line into 2 halves. Take one half out, to form an open-circuit at the other half, i.e., loss of mutual potentials between halves. For the segments (each with Dz=2t) at the open-end, the distributed inductance decreases and the distributed capacitance increases. The decrease of distributed inductance and increase of distributed capacitance are lumped into the last segment, as series –DL1 and series –DC1.;L1/2;The components in the equivalent circuit are:;7.3. The Adding of Lines to Form Other Discontinuities ;B. Bend (two open-circuits joined together with q=900);ΔL12;7.4. Numerical results;B. Step;(b). Step results (Dzp= 2000mm), rad. error 2% at Q.S. Q.S. = t at 4% of substrate λ (arbitrary). ‘No’ error at t = 3%.;C. Bend;(b). Results of bend (Dzp=1000mm). T-line S11= -∞ dB. ‘No’ error between IE3D and equiv. circuit.).;W3;(b). T-junction results (Dzp=300mm). Ports 2 3: equiv. ‘No’ error for S11, S22 S23 at 29 GHz between IE3D and equiv. circuit. ‘No’ means error 1%. 29 GHz = ? Q.S.;2.413mm;Date;Date;9.75mm;Date;Date;Date;Date;Date