ZJHP精小型气动单座调节阀-上海高特自动化仪表厂.docVIP

ZJHM精小型气动套筒调节阀 ZJHM miniature pneumatic sleeve regulating valves 产品概述 General ZJHM系列气动薄膜式套筒调节阀采用顶导向结构，配用多弹簧执行机构。具有结构紧凑、重量轻、动作灵敏、流体通道呈S流线型、压降损失小、阀容量大、流量特性精确、拆装方便等优点。广泛应用于精确控制气体、液体等介质，工艺参数如压力、流量、温度、液位保持在给定值。特别适用于允许泄漏量小阀前后压差大的工作场合。 ZIHM serials pneumatic diaphragm sleeve regulating valves have been designed with a top guide structure and are used with multi-spring actuator. It features compact structure, low weight, flexible action, S-shaped flow channel, low pressure drop loss, high capacity, accurate flow characteristics and easy disassembly. It’s widely used for the accurate control of the gaseous and liquid mediums to keep the process parameters including pressure, flow, temperature and fluid level at the given value. It’s especially suitable for the applications of low allowable leakage and high differential pressure before and after the valves. ZJHM系列调节阀接受调节器标准电信号（经电-气定位器或电-气转换器）输出的控制信号压力，改变阀门开度，以改变被调介质的流量，使流量、压力、温度和液位等参数得到调节，实现生产过程自动化。外来的气动压力信号输入薄膜室后，此压力作用在膜片上产生推力，此推力压缩弹簧组，并使推杆移动而带动阀杆使阀芯开（关），直至推力与弹簧组被压缩后的反力平衡而稳定在行程的某个位置上为止。依照上述原理可知，阀芯位移与输入压力信号具有一定的比例关系。 By receiving the control signal pressure output by the standard electric signals of the regulator(via electricity-air positioner or electricity-air converter), the valve opening is changed, so as to change the flow of the medium to be regulated and then allow parameters such as flow, pressure, temperature and liquid level to be regulated. As a result, the production process automation is achieved. After the extraneous pneumatic pressure signal is input into the diaphragm chamber, it will act on the diaphragm to produce a thrust. The thrust then compress the spring pack, and move the push rod, which drives the spindle to open (close) of the valve clack, until the balance is achieved between the thrust and reaction of the compressed spring pack and the clack is in a stable position of the stroke. It’s concluded from above principle, there’s a definite proportional relation between the core d