51单片机c语言电子万年历完整程序.docx

该程序为51单片机c语言电子万年历#include"reg52.h"//#include<stdio.h>#define uchar unsigned char#define uint unsigned intsbitlcden=P3^4;sbitlcdrs=P3^5;sbit DATA=P0^7; sbit RST=P0^5; sbit SCLK=P0^6;sbit menu=P3^0; //菜单sbit add=P3^1; //加一sbitdec=P3^7; //减一sbit led0=P1^0;sbit led1=P1^1;sbit led2=P1^2;sbit led3=P1^3;sbitds=P3^2;//sbit beep=P3^3;uint temp;float f_temp;uint warn_l1=270;uint warn_l2=250;uint warn_h1=300;uint warn_h2=320;uintget_temp();void delayms(uint x);void write_com(uchar com);void write_data(uchar date);void init();void dis_temp(uint t);void Write1302(uchardat);void WriteSet1302(ucharCmd,uchardat);uchar Read1302(void);uchar ReadSet1302(ucharCmd);void Init_DS1302(void);void DisplaySecond(uchar x);void DisplayMinute(uchar x);void DisplayHour(uchar x);void DisplayDay(uchar x);void DisplayMonth(uchar x);void DisplayYear(uchar x);void DisplayWeek(uchar x);void dis_temp(uint t);void read_date(void);void turn_val(char newval,uchar flag,ucharnewaddr,uchar s1num);void key_scan(void);char code table[]="0123456789" ;uchar code table2[]= "TUEWESTHUFRISATSUNMON";ucharsecond,minute,hour,day,month,year,week,count=0; ucharReadValue,num,time; void delayms(uint x){uinti,j; for(i=x;i>0;i--) for(j=110;j>0;j--);}////////////////////////////////////////////////////////////void write_com(uchar com){lcdrs=0; P2=com;delayms(5);lcden=1;delayms(5);lcden=0;}void write_data(uchar date){lcdrs=1; P2=date;delayms(5);lcden=1;delayms(5);lcden=0;}void init(){lcden=0;write_com(0x38);write_com(0x0c);write_com(0x06);write_com(0x01);}/////////////////////////////////////////////////////////////////void Write1302(uchardat){uchari; SCLK=0; //拉低SCLK，为脉冲上升沿写入数据做好准备delayms(2); //稍微等待，使硬件做好准备 for(i=0;i<8;i++) //连续写8个二进制位数据 { DATA=dat&0x01; //取出dat的第0位数据写入1302delayms(2); //稍微等待，使硬件做好准备 SCLK=1; //上升沿写入数据delayms(2); //稍微等待，使硬件做好准备 SCLK=0; //重新拉低SCLK，形成脉冲dat>>=1; //将dat的各数据位右移1位，准