Socket Wrenches, Handles, and Attachments （套筒扳手、处理和附件）.pdfVIP

ASME B107.110-2012 (Redesignation and Consolidation of ASME B107.1, B107.2, B107.5M, B107.10, B107.12, B107.33M, and B107.34) Socket Wrenches, Handles, and Attachments A N A M E R I C A N N A T I O N A L S T A N D A R D ASME B107.110-2012 (Redesignation and Consolidation of ASME B107.1, B107.2, B107.5M, B107.10, B107.12, B107.33M, and B107.34) Socket Wrenches, Handles, and Attachments A N A M E R I C A N N A T I O N A L S T A N D A R D Two Park Avenue • New York, NY • 10016 USA Date of Issuance: June 7, 2013 This Standard will be revised when the Society approves the issuance of a new edition. ASME issues written replies to inquiries concerning interpretations of technical aspects of this Standard. Periodically certain actions of the ASME B107 Committee may be published as Cases. Cases and interpretations are published on the ASME Web site under the Committee Pages at / as they are issued. Errata to codes and standards may be posted on the ASME Web site under the Committee Pages to provide corrections to incorrectly published items, or to correct typographical or grammatical errors in codes and standards. Such errata shall be used on the date posted. The Committee Pages can be found at /. There is an option available to automatically receive an e-mail notification when errata are posted to a particular code or standard. This option can be found on the appropriate Committee Page after selecting “Errata” in the “Publication Information” section. ASME is the registered trademark of The American Society of Mechanical Engineers. This code or standard was developed under procedu