The ZenerHollomon Parameter Characteristics （ZenerHollomon参数特征）.pdfVIP

The Zener-Hollomon Parameter Characteristics in Hot Rolling of AISI 316 using the Reverse Sandwich Model. 1 2 2 3 O.J. Alamu, Ph.D. , S.O. Giwa, M.Sc. , M.A. Sulaiman, M.Sc. , C.C. Enweremadu, Ph.D. , 4 and I.A. Lateef, B.Tech. 1 Department of Mechanical Engineering, University of Agriculture, PMB2240, Abeokuta, Nigeria 2 Olabisi Onabanjo University (Ibogun Campus), PMB 5026, Ifo Post Office, Nigeria 3 Ladoke Akintola University of Technology, PMB 4000, Ogbomoso, Nigeria. 4 Department of Mechanical Engineering, Osun State College of Technology, Esa-Oke, Nigeria. E-mail: tolasum@ ; baale_i@ ABSTRACT authors [1, 2, 3, 4]. Chikara and Johnson [4] observed a disagreement in the hot rolling of For hot rolling of AISI Type 316 Stainless Steel at relatively heavy sections, where the initial width / low strain rates, temperature distribution in the thickness ratio is less than six (e.g. ingot to billet). through-thickness of the slab are now predicted This was attributed to the simplifying assumption with better accuracy using the Reverse Sandwich of plane strain usually made in rolling theories, Model (RSM) compared with results from the which permits slip-line field approach to be Bland and Ford’s theory or Sims’