375现场校验阀门（375 field check valve）.docVIP

375现场校验阀门（375 field check valve） DVC6010 digital valve positioner is EMERSON for the straight trip valve actuating mechanism design of a new generation of process control products. It has convenient adjustment, easy maintenance, high safety coefficient, self diagnosis etc., won the majority of customers, our company production control valve device of the positioner assembly. In order to let more instrument maintenance personnel will use it, the calibration methods are summarized as follows. Is a type 375 field communicator with HART circuit Type 375 field communicator (375) and the control room, HART or any field instruments in the loop compatible communications equipment, DVC6010 digital valve positioner is compatible with HART devices. 375 and the appropriate connector and the instrument or the load impedance connected in parallel to the polarity insensitive HART wiring. In order to ensure the normal work of at least 375, 4mA current and 12VDC voltage supply DVC6010, impedance in the circuit is not less than 250. 375 of the top 3 ports. Of which 2 are red, 1 black. Red is the cathode of each protocol port, the port for the end of 2 black public agreement. The protective cover device can ensure that any time is only 1 of a port. Port of port mark indicates which corresponds to which a protocol. Two, start the type 375 field communicator Press the on / off key, until the multifunctional LED lights flashing, show that the device has been powered on (about 2 s). On / off key position. See Figure 1. During start-up, 375 will automatically install the system on the card all software upgrade. After the completion of the main menu will display 375: (1) HART Application (start HART application) (2) FOUNDATION FieldbusApplication (start Foundation Fieldbus application) (3) Setting (configuration / view settings) (4) Listen for PC (PC access control) (5) ScratchPad (start ScratchPad application) Three, shutdown Before using the on / off key, must return to the main menu 375.