opgw-1（opgw - 1）.docVIP

opgw-1（opgw - 1） OPGW-1 wire specifications and design data to calculate the serial number: 185 The name of a single symbol number value Specification: wire elasticity coefficient E 114700 MPa Linear expansion coefficient alpha 0.0000152 1/ C Weight per unit length W 0.5777 kg/m The outer diameter of 14 mm D The calculation section 111.1 mm^2 A Tensile force Tp 60500 N Design parameters: design safety factor F 2.8 The average running tension of C less than 25%Tp N The acceleration of gravity g 9.80665 m/s^2 Weather conditions: serial number generation table condition temperature wind speed m/s ice thickness mm The minimum temperature of 00 -20 The average temperature of 1500 The maximum wind -5 300 The ice -5 1010 The highest temperature of 4000 The installation of -10 100 The external overvoltage (no 1500) The external overvoltage (wind) 15100 15150 - Internal Overvoltage Wire load: name symbol (B V) value (N/m) Since the load of P1 (00) 5.6653 Ice load P2 (10) 6.6546 Since the ice load load P3 (10) 12.3199 When the wind load P4 ice free (10) 1.0297 When the wind load P4 ice free (15) 2.3168 When the wind load P4 ice free (30) 6.9505 When the ice wind load P5 (1010) 2.5007 No ice load P6 (10) 5.7581 No ice load P6 (15) 6.1207 No ice load P6 (30) 8.9669 When the ice load P7 (1010) 12.5712 Critical span: initial (m) value (m) control Lr tends to zero to 88.4496 is controlled by the minimum temperature conditions From 88.4496 to 157.4301 by the average air temperature control 157.4301, Lr is sufficiently large by icing conditions OPGW-1 tension and sag calculation result of serial number: 185 | tension | the 4. | (N) | minimum temperature the average temperature of the highest temperature wind icing ___ \ \ 100215271512519390 2029210957 120213691512519537 2073611175 140211881512519696 2119911395 157.432101515125 198412160711584 160209091505719795 2160711556 180200611452719443 2160711352 200191771401519099 2160711167 220 18282 13536 18772 21607 11004 240 17402 13100 18