八、管路改造工程的施工工艺（Eight, pipeline reconstruction project construction process）.docVIP

八、管路改造工程的施工工艺（Eight, pipeline reconstruction project construction process） Eight, the construction technology of pipeline renovation project (a) the construction process Put holes in the pre dug pipe, pipe scale blanking, pipe threading, pipeline installation bracket, embedded embedded parts, pre inspection, formal connection and installation. (two) the construction of A. Generally use the threaded pipe connections. We should be based on the design requirements of pipeline transformation, in the center position of the wall marked wall holes, marked by the cross line on the wall, with percussion drill holes, holes in the center line should be consistent with the center line of the pipeline wall, should be a measure of straight. Pipe threading is a key step to ensure the installation quality, prevent threading appear twill. Before the installation of pipes, should first clean up the tube, the internal clean without debris. When installed, pay attention to the quality of interface, and identify the location and direction of shuaitou control to ensure that the installation after connecting the water equipment in the correct position. Pipeline installation, pipeline should be cleaned, paints, brushing silver paste. (three) galvanized pipe laying installation method (1) the pipeline wall concealed wall, the groove depth and width should not be less than the outer diameter of the pipe and 20mm pipe pressure test after application of 1:3 cement mortar filling compacting groove. (2) concealed pipes in floor surface or ceiling, should be in the pressure test after passing the concealed work acceptance record. (3) with the single root cold water pipes from the wall surface should be 15 ~ 20mm, hot and cold water under the hot water in the cold water in parallel; cold water level parallel pipe, hot water in the cold water pipes in stalls. (4) with hot water pipes should be installed casing wear wall, and the wall of both ends of the sleeve should be flat. (5) the hot water pipe