如何在wincc中实现变量状态监视和连接状态监视（How to implement variable status monitoring and connection state monitoring in WinCC）.docVIP

如何在wincc中实现变量状态监视和连接状态监视（How to implement variable status monitoring and connection state monitoring in WinCC） How do you implement variable status monitoring and connection state monitoring in WinCC? content The FAQ entry deals with the following two questions. Monitor the status of a variable Monitor a connection state Monitoring the status of a variable The state of the checked variable is returned by the global script action, and the status of the variable is monitored, and an alarm is triggered. In the first part of the FAQ, create a global script action to view the variables so that you can output only one message in the output window. In the article The two part configures the global script action to achieve the purpose of outputting messages and triggering an alarm in the window. 1. create global script actions through the following steps to output only one message in the output window No. steps 1 open the global script editor (ANSI C) to create a new action. 2 write the following program functions in actions: #include apdefap.h Int gscAction (void) { DWORD dwState = 0; GetTagSWordState (External_tag_1, dwState); If (dwState = 0) { //Tag status OK Printf (Tag, status, Ok:, [Statuscode (HEX):%X]\r\n, dwState); } Else { //Tag status deviant Printf (Tag, status, deviant:, [Statuscode (HEX):%X]\r\n, dwState); } Return (0); } 3 set the trigger for the action to be monitored variables (here: External_tag_1, cycle: according to change). 4 re execute the header file by executing the menu command from the global script / tool. 5 save actions and close the global script editor. 6 open the graphical editor to create a new process screen (PDL). 7 configure the Global Script Diagnostics through the smart object application window. 8 save the picture and define it as the start screen. 9 If you do not activate, you need to activate the global script runtime system in the computer startup option. Now, when you start the operating system, once the status of the monitored var