mhdd命令详解（MHDD command detailed）.docVIP

mhdd命令详解（MHDD command detailed） MHDD description MHDD command detailed EXIT (hotkey Alt+X): quit to DOS. ID: hard disk detection, including hard disk capacity, head number, sector number, SN serial number, Firmware firmware version, LBA, DMA, numerical support level whether to support the HPA, support AAM, SMART level and switch mode switch state, state security...... Et al.). INIT: hard disk initialization, including Device, Reset (hard disk reset), Setting, Drive, Parameters (setting the hard disk parameters), Recalibrate (recalibration). N. / M9 E1 M9 also G I (hotkey F2): execute both the ID command and the INIT command. 5. E2 C, Z1 g G1 X- F8 J ERASE: quick delete function. Each delete unit is equal to 255 sectors (data recovery is invalid). J# M (H4, K., H5, G9, Y8,}) y AERASE: Advanced delete function, you can delete the data in the specified sector sector by Sector (slower than ERASE, data recovery is also invalid), each deletion unit is equal to 1 sectors. HPA: hard disk capacity cutting capabilities reduce the capacity of hard disks and reduce BIOS detection capabilities, but software such as DM, capable of detecting hard disk drives independent of BIOS, still displays the original capacity of the hard disk. ) Y, T6, Z., K5, G#, H1, B NHPA: restore hard disk capacity to true capacity. RHPA: ignoring capacity clipping, showing the actual capacity of the hard disk. W/, X (P* b y. CLS screen. ) W; X*, X, ^ ^, Q$, L0, G) P PWD: add the USER password to the hard disk, up to 32 bits and no input, which means cancellation. The hard disk is locked completely unable to read or write, low price, etc. all read and write operation is invalid. If you add the password successfully, press the F2 button to see Security, followed by a red ON. Note that after setting the password, you must turn off the power before you start the password will work; UNLOCK: Unlock the hard disk. First select 0 (USER), and then enter the password correctly. Note: Option 1 (Master) cannot unlo