基于NImyDAQ的数据采集系统的设计探究.docVIP

江苏科技大学 本 科 毕 业 设 计（论文） 学 院 电子信息学院 专 业 电子信息工程 学生姓名 班级学号 指导教师 张贞凯 二零年六月江苏科技大学本科毕业论文 Design of data acquisition system based on myDAQ 摘 要 关键词虚拟仪器myDAQ Abstract In the past, a variety of data acquisition is performed by artificial means, it has a lot of limitations, which can not be done on a large number of experimental data .With the development of electronic technology, people can collect and processing large amounts of signal data and analyze the data through computers . Virtual instrument is only a procedural instrument. It is possible to complete a series of data processing and analysis work in the pre-programmed procedures with the combination of virtual instrument and computers. This paper focuses on some typical data acquisition system based on NI myDAQ and designs many useful virtual instrument. Such as Virtual digital voltmeter, which replaced the traditional voltmeter and improved the efficiency and accuracy. Continuous pulse sequence VI, it can generate a any duty and any frequency square wave. Pulse width measurement can measure the width of the pulse sequence quickly and easily by setting the counting methods. Continuous signal acquisition is to acquire signals by using DAQmx API. Simple Edge Count VI can choose the way of counting, it can count the number of a square wave crest quickly and easily. Meanwhile, based on the original data acquisition system .This paper upgrade part of the system to achieve a richer function. Keywords: Virtual instrument; LabVIEW,; NI myDAQ 目录 第一章 绪论 1 1.1 研究背景及意义 1 1.2 国内外发展现状 1 1.3 虚拟仪器 2 1.3.1 虚拟仪器产生的背景 2 1.3.2 虚拟仪器的概念 3 1.3.3 虚拟仪器的开发语言 3 1.4 本文的主要结构 4 第二章 DAQ简介 5 2.1 数据采集卡的硬件简介 5 2.2 数据采集卡的软件简介 6 2.3 设置NI myDAQ设备 6 2.4 本章小结 10 第三章 LabVIEW简介 11 3.1 LabVIEW和G语言的概述 11 3.2 LabVIEW编程环境 12 3.2.1 启动界面 13 3.2.2 前面板 13 3.2.3 程序框图 14 3.3? 浅谈G语言 16 3.3.1 G 语言简