钣金加工流程（Sheet metal processing flow）.docVIP

钣金加工流程（Sheet metal processing flow） Sheet metal processing is called sheet metal processing. For example, the specific use of sheet metal production of chimney, bucket, tank Youhu, ventilation pipe, elbow reducer, park days, funnel-shaped, the main process is shear, bending, bending, buckling edge welding, riveting, requires a certain knowledge of geometry. Sheet metal pieces of hardware that is thin, it is through stamping, bending, stretching and other means to the processing of parts, a broad definition is in the process of constant thickness parts. The corresponding casting parts, forging parts, machining parts etc. Selection of material for sheet metal processing With cold rolled sheet metal is generally used materials (SPCC), hot-rolled plate, galvanized plate (SHCC) (SECC, SGCC), copper (CU) brass, copper, beryllium copper, aluminum (6061, 6063, etc.), aluminum, stainless steel (wire drawing, mirror, fog), according to the product with different materials, different from general products and cost up to consider its use. 1. cold rolled plate SPCC, mainly used in electroplating and paint, low cost, easy molding, material thickness is less than 3.2mm. 2. hot rolled plate material SHCC, T = 3.0mm, is also used in electroplating, paint, low cost, but difficult to molding, mainly for flat pieces. 3. galvanized sheet SECC, SGCC. SECC electrolytic plate is divided into N material, P material, N material, mainly not for surface treatment, high cost, P material used for spraying parts. 4. copper; the main use of conductive materials, the surface treatment is nickel plated, chrome plated, or do not deal with, the cost is high. 5. aluminium plate; surface chromate (J11-A), oxidation (conductive oxidation, chemical oxidation), The cost is high, with silver plated, nickel plated. 6. aluminum profiles, complex structures and materials, are widely used in various boxes. Surface treatment with aluminum sheet. 7. stainless steel; mainly used without any surface treatment, high