油漆知识65问（Paint knowledge 65 questions）.docVIP

油漆知识65问（Paint knowledge 65 questions） 1, why in the paint process, it is best to use primer as the bottom fill? Answer: because primers are designed for filling purposes, they have excellent filling and sanding properties, and are low in cost. If they are made of top coat, the filling is poor and the filling is poor, And the cost is high. 2. Why do not use transparent putty to fill the wooden eye in the bottom coloring process? Answer: before the coloring, the use of transparent putty, will make the board does not color. If the use of transparent putty after coloring, due to uneven thickness of putty, will affect the uniformity of the color. 3, what is the difference between the closing of the bottom and the sealing of the primer? Answer: the bottom penetration is better than the primer. After the film is formed, the seal between the base and the wood fiber is closed, and the film is more dense than the primer. The sealing effect is better. 4. Why should the primer be thoroughly polished before coating the top coat? Answer: 1, increase its adhesion. 2, paint has a strong with the trap, such as primer uneven, then the topcoat coating, coating effect smoothness. 5 、 what is the standard for primer grinding? Answer: 1, 450 corners, no light highlights. 2, frosted glass. At the end of 6, the number of times the paint brush what is the standard? Answer: should be completely filled wooden eyes. That is, by grinding, you can get a smooth paint film effect. 7, why PU paint stressed the main paint, curing agent, diluent supporting the use? Answer: different PU paint has different dilution system, solid content is also different. If you do not match the diluent or curing agent, it will affect the crosslinking reaction of paint, resulting in insufficient hardness, No. Dry, film cracking, etc. 8, PU paint in the deployment, why emphasize the proportion of the required proportion? Answer: the ratio of PU paint to curing agent is calculated by molecular formula of chemical reacti