油漆问题 文本文档（Paint problem text document）.docVIP

油漆问题 文本文档（Paint problem text document） A. Become pale White: paint in the drying process or drying, paint film showing milky, or wood grain, wood and background is not clear phenomenon. Causes: 1, environmental reasons: Construction humidity, high temperature 2, the reasons for the substrate: A and substrate moisture content is too high, not closed. B, constructed of substrate or container containing moisture. 3, construction reasons: A, construction, air compressor or air containing moisture. B, low temperature thick coating C, hand sweat stains of the workpiece, the wet mill. D, water putty is not dry. E, after sanding for too long, the surface of the coating is wet. 4, product reasons: A, diluent boiling point is too low, volatile too fast, or mixed with moisture. The B and diluent do not dissolve enough to precipitate the paint. Contains water C, or paint thinner. D and dark base materials use primers or putty with higher powder content. Terms of settlement： 1, environmental reasons: avoid construction in high humidity, or the amount of using retarder. Found whitish phenomenon, immediately stop construction. 2, the reasons for the substrate: A, wood to be dried to a certain moisture content (usually between 8-15), the effective closure of the base material. B, the construction of the base and paint to avoid mixing moisture. 3, construction reasons: A, install oil and water separator, and timing water. B and adopt the construction method of thin coating multiple times. C, avoid moisture entering the coating. D, water putty must dry. E, avoid sanding for too long. 4, product reasons: A, paint thinner, avoid outdoor storage, will invade moisture. B, dilute the paint with a matching diluent. C, paint and thinner, avoid open-air storage and invade moisture. D, choose the right product. Two, cracking: Cracking: a crack in a linear, polygonal, or indefinite shape on the surface of a coating. Causes: 1, environmental reasons: construction environment temperature is too