基于ANSYS二次开发的堆焊应力与变形分析系统-天津大学期刊中心.PDFVIP

第 49 卷 第 12 期 天津大学学报 (自然科学与工程技术版) Vol.49 No.12 2016 年 12 月 Journal of Tianjin University (Science and Technology) Dec. 2016 DOI:10.11784/tdxbz201509088 基于 ANSYS 二次开发的堆焊应力与变形分析系统 邓彩艳，赵俊美，王东坡，龚宝明 (天津大学材料科学与工程学院，天津 300072) 摘 要 ：以 VC 为平台，针对 ANSYS 建模的缺点，对 ANSYS 提供的参数化设计语言 APDL 进行二次开发，编制 了堆焊结构应力与变形分析系统. 该系统固封了多种建模、热分析及残余应力分析参数化命令流模板. 通过可视化 界面编程操作，实现了多种堆焊结构的参数化建模、温度场模拟、应力场模拟分析. 通过 X65 直管内壁堆焊 Inconel 625 合金实例验证了该应力与变形系统的准确性. 关键词 ：堆焊；残余应力与变形；二次开发 中图分类号：TP12 文献标志码 ：A 文章编号 ：0493-2137 (2016)12-1330-05 System of Surfacing Residual Stress and Deformation Based on Secondary Development of ANSYS Deng Caiyan ，Zhao Junmei ，Wang Dongpo ，Gong Baoming (School of Materials Science and Engineering ，Tianjin University ，Tianjin 300072 ，China) Focusing on the disadvantage in modeling, an analytical system of surfacing residual stress and deforma- Abstract ： tion was built through the secondary development based on the ANSYS parametric design language and VC platform. The system encapsulated a variety of parameterized command stream templates about modeling, thermal analysis and residual stress analysis. Through intuitive interface operation, parameterized modeling, temperature field simulation and stress field simulation of many different kinds of surfacing forms were accomplished. The analytical system turned out to be accurate as compared with the experimental results of X65 pipe and Inconel 625 alloy for surfacing. surfacing ；residual stress and deformation ；secondary development Keywords ： 随着社会经济的发展，高含硫气井开采力度日益 进行二次开发[6-7] ，实