最新GF WELDING控制器故障代码及解决方法-2012-12-10.pdf

Programming instructions Appendix –Diagnostics Alarms: causes and remedies：附录—诊断报警： 原因和措施 Description of alarms—报警内容说明 Code Message Remarks Activities 代码 故障信息 备注 措施 E001 Tip warning Stepper A in prewarning (see section Indication that tip change or dress channel A 5.6.3.4)台阶递增A 预报警 （看章节 on channel A must be done soon 路径A 台阶报警 5.6.3.4） 表明路径A 马上要修磨或更换电极帽 The red led W.STEP. A on the front panel is on. 控制器正面焊接台阶递增 B 红灯亮 E002 Tip warning Stepper B in prewarning (see section Indication that tip change or dress channel B 5.6.3.4).台阶递增 B 预报警 （看章节 on channel B must be done soon 路径 B 台阶报警 5.6.3.4） 表明路径B 马上要修磨或更换电极帽 The red LED W.STEP. B on front panel is on. 焊接台阶递增 B 红灯亮 E003 Warning Cable wear counter A in prewarning. Indication that maintenance for threshold cable (see section 3.4.1.2) the cable on channel A must be channel A：路径A 路径A 电缆磨损预报警 done soon表明路径A 电缆马上需要维 电缆极限报警 修 E004 Warning Cable wear counter B in prewarning. Indication that maintenance for threshold cable (see section 3.4.1.2) the cable on channel B must be channel B：路径B done soon表明路径B 电缆马上需要维 路径 B 电缆磨损预报警 电缆极限报警 修 E005 Meas.curr.min The measured current value was  Check value of tolerance (see threshold n-times between %I.min and %I.lim