三、安全规范标准流的程(分解、认知标准规范).ppt

;;一、脚手架工程规范 1、落地式双排脚手架 2、悬挑脚手架 3、爬升式脚手架 4、内脚手架（满堂、双排） 5、悬挑式接料平台 6、上人马道 ;1―外立杆；2―内立杆；3―横向水平杆；4―纵向水平杆；5―栏杆；6―挡脚板；7―直角扣件；8―旋转扣件；9―连墙件；10―横向斜撑；11―主立杆；12―副立杆；13―抛撑；14―剪刀撑；15―垫板；16―纵向扫地杆；17―横向扫地杆；　　 图1 扣件式钢管脚手架各杆件位置。;1―立杆；2―纵向水平杆；3―横向水平杆；4―竹笆脚手板；5―其它脚手板　　 图6.2.1－2 铺竹笆脚手板时纵向水平杆的构造 ;注：1．表中所示2+2+4×0.35（kN/m2），包括下列荷载：2+2（kN/m2）是二层装修作业层施工荷载；4×0.35（kN/m2）包括二层作业层脚手板，另两层脚手板是根据本规范第7.3.12条的规定确定；　　2．作业层横向水平杆间距，应按不大于la/2设置 ;s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s s ;垫木;连墙件;Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd.;Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd.;Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd.;荷 载 分 类 ;水平风荷载 kN/m2;荷载效应组合;;;;;;;;;;;;5．3．4 由风荷载设计值产生的立杆段弯矩Mw，可按下式计算：　　Mw=0.85×1.4Mwk=0.85×1.4ωklah2/10 （5.3.4）　　式中 Mwk——风荷载标准值产生的弯矩；　　ww——风荷载标准值，应按本规范（4.2.3）式计算；　　la——立杆纵距。;;;;;Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd.;Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd.;Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd.;Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd.;侧面图;节点①详图;Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd.;Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd.;Evaluation only. Created with Aspose.Slides fo