基于波长分区的半色调色光谱估算模型-包装工程.pdfVIP

包 装 工 程 第37 卷 第23 期 ·176 · PACKAGING ENGINEERING 2016 年 12 月 基于波长分区的半色调色光谱估算模型 田全慧 1,2 ，刘真 1 ，张建青 1 ，刘士伟 1 （1.上海理工大学，上海 200093 ；2.上海出版印刷高等专科学校，上海 200093 ） 摘要：目的 研究半色调打印色的光谱呈色特性，为半色调打印色的光谱复制提供估算模型。方法 分 析不同阶调值的半色调打印色的光谱反射曲线特性，根据半色调打印色的光谱微分找出特征波段， 并进行波长分区。在不同的波长分区分别使用网点增大补偿与多项式算法估算半色调打印机的光谱 反射率。结果 提出的半色调光谱估算算法估算的光谱与实际测量的 sRMS 最大值为0.02 ，对应的 估算色与测量色的平均色差小于 1.5ΔE76 。结论 使用波长分区的光谱估算模型可提高半色调复制色 的光谱估算精度，半色调彩色输出设备的光谱特征化可以使用文中的估算模型作为正向特征化模型。 关键词：光谱估算；光谱分区；半色调；打印机特征化 中图分类号：TS801.3 文献标识码：A 文章编号：1001-3563(2016)23-0176-05 Spectral Piecewise Partition Model(SPPM) for Predicting Halftone Printing Color 1,2 1 1 1 TIAN Quan-hui , LIU Zhen , ZHANG Jian-qing , LIU Shi-wei (1.Shanghai University of Science and Technology, Shanghai 200093, China; 2.Shanghai Publishing and Printing College, Shanghai 200093, China) ABSTRACT: The work aims to study the spectral coloring characteristics of the halftone printing color so as to provide estimation model for the reproduction of spectrum of halftone printing color. The spectral reflection curve’s characteris- tics of halftone printing color of different tone values were analyzed. The characterized bands were found out according to spectral derivative of halftone printing color and then wave-length partition was carried out. Dot gain compensation and polynomial algorithm in various wave-length partitions were respectively used to estimate the spectral reflectance of halftone printer. The maximum of spectrum estimated with the halftone spectrum estimation algorithm proposed and the measured sRMS was 0.02. The average color difference b