一种基于平面的手术机器人手眼标定方法-生物医学工程学杂志.PDF

一种基于平面的手术机器人手眼标定方法-生物医学工程学杂志.PDF

  1. 1、本文档共8页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
一种基于平面的手术机器人手眼标定方法-生物医学工程学杂志

• 200 • Journal of Biomedical Engineering, Apr. 2017, Vol. 34, No.2   ·论 著· 一种基于平面的手术机器人手眼标定方法 1 1 1 2 2 1 曾柏伟,孟繁乐,丁辉,刘文博,吴迪,王广志 1. 清华大学 医学院 生物医学工程系(北京  100084 ) 2. 华科精准(北京)医疗科技有限公司(北京  100062 ) 【摘要】   本文针对机械臂末端安装激光测距仪的手术机器人的手眼标定,设计了基于平面模板标定的方 法,给出了平面模板的数学模型并推导了求解方法。针对实际系统中存在的测量误差,提出了一种新的关于单平 面数据优选的算法,可有效地剔除测量误差大的数据,提高标定精度;在此基础上,进一步提出使用立体正交平 面改进标定精度的方法,应用非线性优化方法提高手眼标定精度。为验证精度,使用激光测距仪从不同角度、位 置对空间中的某些固定点和一个长方体的表面进行测量。结果表明,单平面方法标定的精度为(1.37±0.24)mm , 使用立体正交平面得到的标定精度为(0.37±0.05)mm ;测量三维空间点的平均 FRE 为 0.24 mm ,平均 TRE 为 0.26 mm ; 角度的测量偏差最大为 0.4° 。通过实验验证了本文方法的有效性,同时结果表明本方法的标定精度较高,能够满 足手术机器人准确定位的需求。 【关键词】  手术机器人;手眼标定;激光测距仪;立体正交平面;非线性优化 A plane-based hand-eye calibration method for surgical robots 1 1 1 2 2 1 ZENG Bowei , MENG Fanle , DING Hui , LIU Wenbo , WU Di , WANG Guangzhi 1. Department of Biomedical Engineering, Tsinghua University, Beijing 100084, P.R.China 2. Sino Precision Medical Technology (Beijing) Co., Ltd, Beijing 100062, P.R.China Corresponding author: WANG Guangzhi, Email: wgz-dea@mail.tsinghua.edu.cn 【Abstract 】 In order to calibrate the hand-eye transformation of the surgical robot and laser range finder (LRF), a calibration algorithm based on a planar template was designed. A mathematical model of the planar template had been given and the approach to address the equations had been derived. Aiming at the problems of the measurement error in a practical system, we proposed a new algorithm for selecting coplanar data. This algorithm can effectively eliminate considerable measurement error data to improve the calibration accuracy. Furthermore, three orthogonal planes were used to improve the calibration accuracy, in which a no

文档评论(0)

wumanduo11 + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档