CANFD协议（物理层）DS601-CANFD1.pdf

CiA® 601 Work Draft With flexible data rate (CAN FD) Part 1: Physical interface implementation This WD is for CiA members only and is still under development Version: 0.0.7 01 December 2014  CAN in Automation (CiA) e. V. With flexible data rate (CAN FD) – Part 1: Physical interface implementation HISTORY Date Changes ??.??.20?? Publication of Version 1.0 as draft standard proposal General information on licensing and patents CAN in Automation (CiA) calls attention to the possibility that some of the elements of this CiA specification may be subject of patent rights. CiA shall not be responsible for identifying any or all such patent rights. Because this specification is licensed free of charge, there is no warranty for this specification, to the extent permitted by applicable law. Except when otherwise stated in writing the copyright holder and/or other parties provide this specification “as is” without warranty of any kind, either expressed or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The entire risk as to the correctness and completeness of the specification is with you. Should this specification prove failures, you assume the cost of all necessary servicing, repair or correction. Trademarks CANopen® and CiA® are registered community trademarks of CAN in Automation. The use is restricted for CiA members or owners of CANopen® vendor ID. More detailed terms for the use are available from CiA. © CiA 2014 All rights reserved. Unless otherwise specified, no part