基于遗传算法的蜂窝板换热器多目标优化-高校化学工程学报.pdfVIP

第29 卷第5 期 高 校 化 学 工 程 学 报 No.5 Vol.29 2015 年10 月 Journal of Chemical Engineering of Chinese Universities Oct. 2015 文章编号：1003-9015(2015)05-1201-06 网络出版地址：/kcms/detail/33.1141.TQ1527.005.html 基于遗传算法的蜂窝板换热器多目标优化 夏春杰, 王定标, 董永申, 朱有健, 向 飒 (郑州大学 化工与能源学院, 河南 郑州 450001) 摘 要：基于Workbench 目标驱动优化系统，采用遗传算法对蜂窝板换热器进行了多目标优化研究，探讨了焊孔半径 P 1、蜂窝板半径P2 、焊点间距P3 等结构参数对蜂窝板各优化目标的影响并考察了各参数灵敏度。结果表明：蜂窝板结 构不断扰乱了流体的边界层，很大程度上强化了传热；在研究范围内雷诺数的改变并不影响各参数与目标函数的关系； 发现蜂窝板半径P2 对各优化目标影响最大，并得出了3 组较优结果；通过对蜂窝板在3000 ≤Re ≤ 25000 的数据结果 进行关联，得到了蜂窝板流动换热的准则关系式，对此结构有一定的通用性。 关键词：蜂窝板； 遗传算法；多目标优化；场协同；换热器 中图分类号：TQ 027.2 文献标识码：A DOI ：10.3969/j.issn.1003-9015.2015.00.024 Multi-Objective Optimization of Honeycomb Plate Heat Transfer Exchangers Using a Genetic Algorithm Method XIA Chun-jie, WANG Ding-biao, DONG Yong-shen, ZHU You-jian, XIANG Sa (School of Chemical Engineering and Energy, Zhengzhou University, Zhengzhou 450001, China) Abstract: Based on the Workbench goal driven optimization system, genetic algorithm was used to optimize a honeycombed plate heat transfer exchanger. The effects of structural parameters (P 1, P2, and P3) on the optimization objectives were investigated and the sensitivity of these parameters was studied. The results show that the honeycombed structure disrupts the fluid flow around the boundary layer which greatly improves heat transfer. Re has no effects on the relationship between the studied parameters and the objective function under the current calculation conditions. P2 has the most obvious influence on the objective f