毕业论文（设计）基于ProENGINEER的插销塑料模具设计与制造.docxVIP

摘要中文摘要：本文以日常使用的电源插座作为研究对象, 详细阐述了塑料插销注塑模具的整个设计过程。设计的内容如下：首先对塑件进行综合分析，了解工程塑料的特性，考虑选择哪种塑料，预算单个制品的体积及重量，选择成型设备的类型和规格，选择成型方案，确定模具的成型结构，然后对主要零部件的进行设计计算，还有其他零部件的设计及选用，通过pro/e三维机械设计完成模具的装配，导出模具的装配工程图，编写主要成型零件加工工艺过程，最后根据以上写出设计说明书。用Pro/E软件中的制造模块完成型腔、型芯、分型面、浇注系统的设计。用Pro/E中模具设计的外挂软件EMX7.0完成塑料插销模架的设计及其它结构零部件的设计。最后，生成模具的三维装配图。关键词：Pro/E 插销 注塑模English abstract：This article take the socket of daily use as the research object, the whole design process of plastic bolt injection mold is described in detail. Design content is as follows: first, comprehensive analysis the plastic parts, understand the characteristics of the engineering plastics, consider to choose what kind of plastic, estimate the volume and weight of a single product, choose the type of molding equipment and specifications, choice the forming scheme, determine the shape structure of the mold, then, design the main components and other components, through the pro/e three dimensional mechanical design complete mold assembly, draw the assembly diagram of the mold, write the main forming parts processing process, Finally, write the design specification according to the above steps.Using the manufacturing module in Pro/E software to complete the design of the cavity and core，the design of fractal surface and pouring system. The design of the plastic pin rack and other design of other structural parts are designed using the mold design in Pro/E. Finally, complete the 3d assembly diagram of the mold.Key words: Pro/E Socket Injection mold 目录摘要1目录2绪论4一、塑件的工艺分析51.1塑件原材料的分析51.1.1选择材料51.1.2聚丙烯(PP)的注射成型工艺参数61.2塑件结构分析61.3塑件尺寸精度分析71.4塑件表面质量分析71.5塑件脱模斜度的分析7二、注射机型号的初步确定82.1计算塑件的体积与质量82.2初步选择注射机8三、塑件在模具中的位置93.1型腔数目的确定及型腔的布置93.2分型面的确定10四、浇注系统的设计104.1主流道的设计104.2分流道设计114.3浇口的设计124.4 冷料穴与拉料杆设计13五、成型零部件的设计135.1型腔和型芯的结构设计135.2 型腔和型芯的工作尺寸计算14六、模架的选择16七、合模导向机构的设计177.1导柱的设计177.2 导套的设计18八、推出机构的设计198.1脱模力的计算198.2推杆的设计198.3复位杆的设计20九、排气系统及调温系统的设计21十、注射机相关参数的校核2210.1最大注射量的校核2210.2注射压力的校核2310.3锁模力的校核2310.4开模行程的校核2410.5 模具闭合高度的校核24十一、模具的装配25十二、模具主要零