GL水下检验要求General Information for IW-Notation.pdf

I - Part 1 Section 34 C Special Requirements for In-Water Surveys Chapter 1 GL 2007 Page 34–1 Section 34 Special Requirements for In-Water Surveys A. General 7. Liners of rudder stocks and pintles as well as bushes in rudders are to be marked such that the diver Ships intended to be assigned the class notation IW will notice any shifting or turning. (In-Water Survey) shall comply with the requirements of this Section enabling them to undergo in-water surveys. 8. For other equipment, such as bow thrusters the requirements will be specially considered taking into account their design. B. Special Arrangements for In-Water Surveys 9. In case of existing ships below 100 m in length the requirements specified in paragraphs 3., 5. and 7. may be dispensed with. 1. The ships underwater body is to be protected against corrosion by an appropriate corrosion protec- tion system which consists of a coating system in combination with cathodic protection.