燃油燃烧器控制器说明书Honeywel+TMO+720-4.pdf

Oil Burner Control Box TMO 720-4 410e/08/96 For forced-draught burners with a capacity of over 30 kg/hour in intermittent operation, 1 or 2-stage Flame detector: - photo-resistor FZ 711 S - infrared flicker detector IRD 1010 INTRODUCTION The TMO 720-4 oil burner control box is capable of control- ling and monitoring medium to high capacity forced-draught burners (tested and approved as per EN 230). It can be employed, as preferred, for multi-stage or modu- lating operation, with burners of any nominal rating or with stationary warm air generators (as per DIN 4794). The TMO 720-4 is fully interchangeable with the earlier ver- TECHNICAL DATA sion, the TMO 720-2. Supply voltage 220 / 240 V (-15... +10%) 50 Hz (40 - 60 Hz) CONSTRUCTIONAL FEATURES AC frequency variations result in proportional timing deviations The control box is enclosed in a protective, flame resistant, Fuse rating max. 10 A rapid, 6 A slow transparent, plug-in type plastic housing, and includes: Power consumption 15 VA - Synchronous motor with reduction gearing driving cam Max. current per output switches terminal 4 A - Cam switches with informative, coloured programme in- Total 6 A dicator Approved for burners of unlimited capacity - 16-way cam switch assembly controlling the programme