低温热水地板辐射采暖毕业论文.doc

摘 要 本次毕业设计的任务是烟台市某办公综合楼供热系统设计。建筑物的高度是36.9m，建筑面积大约4290㎡。本次设计采用低温热水地板辐射的采暖方式，供回水温度为40/30℃，供热系统采用程系统，供水方式采用下供下回的双管系统，室内盘管的敷设形式采用回字形和S形组合方式。小区采用换热站供热，用外网130℃的高温热水将小区70℃回水加热到95℃，其中换热器单台换热量为2800KW，总换热量为5600KW。 关键词 :低温热水地板辐射采暖 程 换热站 ABSTRACT Because of a series of advantages such as economy, energy efficiency and comfort, low-temperature radiant floor heating technology has not only been used in restaurants, shopping malls, exhibition halls, stadiums and other large public buildings, but also has spread to residence or even started to be used in projects like large outdoor terrace, evergreen lawns, farms and greenhouse farming. PEX pipe with low- temperature radiant floor heating is a new practical technology that was introduced by foreign countries in the middle 1980s with the development of the chemical industry. In the late eighties and early nineties, China introduced from abroad the low-temperature hot water heating technology and successfully applied it in many projects. This graduate design mission is the Office Building of Yantai，which is a mixed-used one，to transact the mansion heating system design . The height of the building is 36.9 m and the building area is about 4290 m2. This design introduced the system of the low-temperture hot-water radiant floor heating. The temperature of the supply and return water are 40/30℃. The heating system adopts different-process two-pipe system. The hot water supplied from the downside and returned from the upside. A heat transfer stand supplys heat for the district. Two refled tube heat exchanger are used. The high-temperture-hot-water suppled by the outer net gives heat to the return water from the district. KEYWORDS: the low-temperture hot-water radiant floor heating, different-process, two-pipe system, heat transfer stand, model selection 目录 1 建筑概况 1 1.1 建筑概况 1 1.2 设计内容 1 1.3 设计原则 1 2 系统选择 2 2.1 低温热水地板辐射采暖简介 2 2.1.1 地板辐射采暖的优点 2 2.1.2 地板辐射采暖的缺点 3 2.2 室内采暖系统方案的确定 3 2.2.1 供水立管的位置的确定 4 2.2.2 地板采暖的主要技术参数 4