蜂鸣器 SMD-096050F-05027BJ金脚(A16)客户抬头.docVIP

SPECIFICATION FOR APPROVAL 承 认 书 Description : Magnetic Buzzer Vender’s Part No. : SMD-096050F-05027BJ Customer’s. Part No. : Serial No. : FDM-2004 Version No. : 1.1 CUSTOMER’S APPROVED SIGNATURE Add: ZhenLu Industry Area Wujin Changzhou(常州市武进郑陆工业园区). TEL: 0519FAX: 0519Mobile:115852642543 / E-Mail: xiaocheng.yao@163.com Approved By Checked By Made By Li 2014-4-20 Zhu 2014-4-20 A. SCOPE This specification applies magnetic buzzer, SMD-096050F-05027BJ B. SPECIFICATION No. Item Unit Specification Condition 1 Oscillation Frequency KHz 2.7?.3 o2 Operating Voltage VDC 4~7 3 Rated Voltage VDC 5 4 Current Consumption mA MAX. 30 at Rated Voltage 5 Sound Pressure Level dB MIN. 83 at 10cm at Rated Voltage 6 Tone Nature Single 7 Operating Temperature ℃ -20 ~ +70 8 Storage Temperature ℃ -30 ~ +85 9 Dimension mm 9.6x 9.6x H5.0 See appearance drawing 10 Weight (MAX) gram 1.5 11 Housing Material PPS( Black ) 12 Leading Pin Plated Brass(Au) See appearance drawing 13 Environmental Protection Regulation RoHS C. APPEARANCE DRAWING Tol : ± 0.3 Unit: mm  D.TESTING METHOD Standard Measurement conditions Temperature:25±2℃ Humidity:45-65% Acoustic Characteristics: The oscillation frequency, current consumption and sound pressure are measured by the measuring instruments shown below In the measuring test, buzzer is placed as follows: E. VOLTAGE / CURRENT / SOUND PRESSURE CHARACTERISTICS F. Soldering Condition (1)Recommendable reflow soldering condition is as follows (Reflow soldering is twice) Note:It is requested that reflow soldering should be executed after heat of product goes down to normal. Heat resistant line (Used when heat resistant reliability test is performed) (2)Manual soldering Manual soldering temperature 350 oC within 5 sec.  G. RELIABILITY