opnet整理.docVIP

1.Process: Ethernet_mac_v2, llm_mac:接收任意source的包，停留一段时间用于表示服务时间，然后转发给同一个destination 2.Project ethernet 3.Packet ethernet_v2 4.node ppp_wkstn_adv(no mac layer),ppp_server_adv(no mac layer)，atm_wkstn,mipv6,mipv6_adv 5.server 对于server，对象面板中有专门的server config对象，用于对server的硬件属性设置。 Project域的meue中，protocol→server下各种操作的意义： 1)open server library: view and edit current server definitions, and create new server definitions. 2)Upgrade/Downgrade Servers:打开server scaler, rapidly deploy server definitions to one or more servers in the network model. You can select multiple server definitions to deploy 3)Show/Hide Server Planning Toolbar：打开server仿真，brings up a set of selections related to discrete event simulations. 4)Refresh Server Data：deploy system performance data to existing servers in the Project Editor without using SCE. To use this shortcut, you must provide the performance data and an SCE job template to filter the processes into server jobs. Atm_server, 6.path model(有专门的path editor) Model attributes: two endpoints only:set yes,则只可以产生单分段路径。 packet format: Each path has a defined set of supported packet formats. You cannot define a link as part of a path unless that link supports all formats included in the path models Packet Formats field. (If a path supports no packet formats, you can include any link in the path definition.) subnet ignored: set to Yes, you cannot include a subnetwork object in a path definition. (However, you can still include nodes from different subnets in the same path.) allow cycle: set to No, you can only include each link or site once in a path definition. Path editor path connectivity: define whether you can (or must) include link objects when defining a path based on that model. Links required option说明了一个完整的路由定义，所以必须说明路径上连接所有点的links Links ignored option无需说明路径上连接节点间的Links Links optional option说明link is 可选的，可说，也可不说。 7.probe editor Probe editor include: global statistic probe,node statistic probe,link statistic probe,path statistic probe,demand stat