Examination Questions on “Digital Signal Processing.docVIP

Examination Questions on “Digital Signal Processing” (120 minutes) No. 1 2 3 4 5 6 7 Total Score Let x(n)={1,-2,4,6,-5,8,10}, n=-4:2; [12 points] (a). Determine the odd part and the even part of x(n). (b). Calculate y(n)=2x(n-2)+ x(n+1)x(n)- x(-2-n) (c). Write a MATLAB program to generate the sequence of y(n) in (b). Problem 1 even part: odd part: MATLAB Program n=-4:2; x=[1 -2 4 6 -5 8 10]; [x11,n11]=sigshift(x,n,2); [x12,n12]=sigshift(x,n,-1); [x13,n13]=sigfold(x,n); [x13,n13]=sigshift(x13,n13,-2); [x12,n12]=sigmult(x,n,x12,n12); [y,n]=sigadd(2*x11,n11,x12,n12); [y,n]=sigadd(y,n,-1*x13,n13) Given sequence x(n)={4,2,1,0,1,2,4} with sample period Ts=0.001sec. [25 pints] (a). Determine the expression X(ejω)= DTFT[x(n)], discuss the periodicity of X(ejω). (b). Write a MATLAB program for plotting magnitude and phase response of X(ejω), where ω is evenly separated into 1000 points between [0,π] radius. (You needn’t plot it) (c). Guess and make comments on the property of its angle plot. Why? (d). Determine the corresponding analog frequency of the digital frequency ω=0.3π, and ω=1.3π. (e). Comment on the difference of amplitude and magnitude responses. Problem 2 (a)，is periodic in with period 2 (b) MATLAB Program: clear; close all; n = 0:6; x = [4,2,1,0,1,2,4]; w = [0:1:1000]*pi/1000; X = x*exp(-j*n*w); magX = abs(X); phaX = angle(X); % Magnitude Response Plot subplot(2,1,1); plot(w/pi,magX);grid; xlabel(frequency in pi units); ylabel(|X|); title(Magnitude Response); % Phase response plot subplot(2,1,2); plot(w/pi,phaX*180/pi);grid; xlabel(frequency in pi units); ylabel(Degrees); title(Phase Response); axis([0,1,-180,180]) (c) Because the given sequence x (n)={4,2,1,0,1,2,4} (n=0,1,2,3,4,5,6) is symmetric about ,the phase response satisfied the condition： so the phase response is a linear function in . (d) ; (e) The difference of amplitude and magnitude response: Firstly, the amplitude response is a real function, and it may be both p