戴尔6024F交换配置机.docVIP

戴尔6024F交换机图 超级终端连接 把交换机和电脑用COM(RS-232)连接，按下图设置端口参数 确定后进人超级端口设置 回车 console 控制台 console enable 控制台 启用 console# delete startup-config 删除启动配置 Startup file was deleted 启动文件被删除 12-Jan-2008 13:04:12 %FILE-I-DELETE: File Delete - file URL flash://startup-conf Ig 1月12日13时04分十二秒％文件2008 - I型删除：删除文件console# reload 重新加载 You havent saved your changes. Are you sure you want to continue ? (Y/N)[N] 您尚未保存的更改。你确定要继续吗？ （是/否）This command will reset the whole system and disconnect your current session. Do you want to continue ? (Y/N)[ 此命令将重置整个系统和断开当前会话。做您要继续吗？ （是/否）[Would you like to enter the setup wizard (you must answer this question within 60 seconds)? (Y/N)[Y] Y You can exit the Setup Wizard at any time by entering [ctrl+Z]. 你想进入设置向导（你必须回答这个问题属于60秒）？ （是/否）[Y]条?您可以随时退出安装向导通过输入[按CTRL + Z]。Would you like to setup the SNMP management interface now? (Y/N)[Y] 你想安装的SNMP管理接口呢？ （是/否）[YTo add a management station: Please enter the SNMP community string to be used: [Dell_Network_Manager] 要添加管理站：请输入SNMP团体字符串将用于：[戴尔网络管理]SNMP接口用户名不是 WEB。不会用） Please enter the IP address of the Management System (A.B.C.D) or wildcard (0.0.0.0) to manage from any Management Station:[0.0.0.0] 请输入管理系统（ABCD的）的IP地址或通配符（0.0.0.0）来管理，从任何管理站：[0.0.0.0]Now we need to setup your initial privilege (Level 15) user account. This account is used to login to the CLI, Telnet and Web interface. You may setup other accounts and change privilege levels later. For more information on setting up user accounts and changing privilege levels, see the user documentation. To setup a user account: Enter the user name1-20:[admin] 现在我们需要设置您的初始权限（15级）的用户帐户。此帐户是用来登录到CLI，Telnet和Web界面。您可能设置其他帐户和更改权限级别更高版本。有关设置用户帐户和更改权限级别的信息，看到用户文档。要设置用户帐户：输入用户名1-20：[管理]Please enter the user password:设个密码 Please reenter the user password: 确认密码 Next, an IP address is setup. The IP address is defined on the out-of-band port. This is the IP address you use to access the Telnet, Web interface, or SNMP interface for the switch. To setu