oracle 单实例安装配置流程.docVIP

oracle 单实例安装配置流程 一、网络 1、双网卡绑定 ifcfg-bond0 文件内容 DEVICE=bond0 BOOTPROTO=none ONBOOT=yes TYPE=Ethernet BROADCAST=55 IPADDR= NETMASK= NETWORK= GATEWAY=54 USERCTL=no PEERDNS=no ifcfg-eth0 文件内容 DEVICE=eth0 BOOTPROTO=none ONBOOT=yes TYPE=Ethernet MASTER=bond0 SLAVE=yes USERCTL=no PEERDNS=no ifcfg-eth1 文件内容 DEVICE=eth1 BOOTPROTO=none ONBOOT=yes TYPE=Ethernet MASTER=bond0 SLAVE=yes USERCTL=no PEERDNS=no modprobe.conf 文件中添加 alias bond0 bonding alias bond1 bonding options bonding miimon=100 mode=1 max_bonds=2 二、逻辑卷创建 三、os 1、关闭服务 --关闭 chkconfig sendmail off chkconfig isdn off chkconfig pcmcia off chkconfig iptables off chkconfig mdmonitor off chkconfig rhnsd off chkconfig smartd off chkconfig cups off chkconfig cups-config-daemon off chkconfig iiim off chkconfig httpd off chkconfig squid off chkconfig smb off chkconfig ip6tables off chkconfig gpm off --检查 chkconfig --list sendmail chkconfig --list isdn chkconfig --list pcmcia chkconfig --list iptables chkconfig --list mdmonitor chkconfig --list rhnsd chkconfig --list smartd chkconfig --list cups chkconfig --list cups-config-daemon chkconfig --list iiim chkconfig --list httpd chkconfig --list squid chkconfig --list smb chkconfig --list ip6tables chkconfig --list gpm 2、设定os核心参数 [oracle@zshz-db1 etc]$ vi /etc/sysctl.conf kernel.core_uses_pid = 1 kernel.shmall =8388608 kernel.shmmax =kernel.shmmni = 4096 kernel.sem = 250 32000 100 128 fs.file-max = 65536 net.ipv4.ip_local_port_range = 1024 65000 net.core.rmem_default = 262144 net.core.rmem_max = 262144 net.core.wmem_default = 262144 net.core.wmem_max=262144 /sbin/sysctl -p --是设置的值生效 sysctl -a | grep shmmax 3、增加 oracle user limit /etc/security/limits.conf中增加如下几行 oracle soft nproc 8192 oracle hard nproc 16384 oracle soft nofile 8192 oracle hard nofile 65536 4、create oracle user groupadd -g 501 oinstall groupadd -g 502 dba useradd -u 501 -g oinstall -G dba oracle mkdir -p